Tel: 01902 581 301  Mon-Fri  9am-4pm
6 Way Telecaster® Wiring Harness | Six String Supplies

6 Way Telecaster® Wiring Harness


Our 6 way Telecaster harness adds an extra 3 switching positions to the standard 3 way wiring we all know and love.

Featuring the incredibly discreet Free-Way 3B3-01 blade switch, the 6 way Tele® harness enables series, parallel and out of phase switching, literally reaching each possible combination from a 2 single coil pickup guitar.

The Free-Way 3B3 switch is nice and discreet and sits in a standard Tele® control plate. Rather than faffing around with push pull pots or mini toggle switches, all of the switching is, surprisingly, done via the switch.

Containing two banks of 3 switch positions (lower bank and upper bank) the 6 way Telecaster harness maintains the classic switch positions we are all familiar with.

Flicking the switch into the upper bank, enables series/parallel switching, neck and bridge pickup combinations and all three pickups on simultaneously.

6 Way Tele® Harness Features:
- Free Way 3B3 Blade Switch
- 250k SSS Premium® CTS pots
- Prewired Switchcraft 1/4'' jack socket
- 0.047uF SSS Premium® PIO capacitor
- Treble bleed cap on volume control

For the full guide to switch positions, refer to the schematic attached.

Switch Positions:

Lower Bank (normal Tele® wiring)
1) bridge
2) bridge + neck
3) Neck

Upper Bank (series/parallel & out of phase combos)
4) in parallel, out of phase
5) in series, out of phase
6) in series, in phase

Will this fit my guitar?
The 6 way Tele® wiring harness will fit most USA/Mexican made Fender Telecaster® models with no modification required. If fitting into import models/copies/partscasters, you may be required to ream or drill the pot holes to 3/8'' diameter to take the larger CTS pot shafts.

A cavity depth of 34mm is required for the switch.
This kit requires a metric fitting switch tip.

Please note prewired kit orders take up to 5 business days to assemble and pack. Refer to our shipping policy